Quick review – Turnigy i10 telemetry transmitter

 misc, Uncategorized  Comments Off on Quick review – Turnigy i10 telemetry transmitter
Dec 312015
 

I purchased this 10 channel transmitter ‘on sale’ from Hobbyking; only mode 2 so needed to change to mode 1 which just meant reversing the gimbals and changing the mode setting in the transmitter. There are lots of ‘unpacking’ videos on Youtube so I won’t even go there. The first thing you notice is its so thin which is possible as it uses a 1 cell lipo which is charged via a mini USB connector so no problem there as I have lots of these cables even in the car. The ‘net’ advises that the mini usb plug is a bit fragile so we will have to see. It uses a touch sensitive screen which is fun to play with and quite usable.

Without any external sensors, it displays the receiver voltage and error rate. In full sun its hard to read the lcd screen but then, unless you are flying a glider or similar, you need to focus on the task at hand, flying the model. The standard package comes with 2 external sensors as well. The transmitter doesn’t support speech but has beeps and things. I have had about 5 flights so far and no errors when flying at Trentham (now is that a good thing??).  At this stage there are few other receivers available for use with this transmitter although the standard 10 channel receiver is $US20 which is good except it is a bit big for that smaller model. The trims for elevator and throttle are not in the normal place but too early to say that this is an issue.

The sticks are too short so I borrowed some longer ones which feels better. All the switches are assignable to the extent that you need to assign the switch you want for rates and expo… so its quite flexible.

It doesn’t have the quality of some of the named transmitters but its a great radio and I intend to get some more receivers for other models. The reviews I have read on that there internet thing are favourable but again, its a personal thing.

Its currently retails for $US177 from the Aussie Hobbyking warehouse http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=75276 which is not bad value (but then I got it cheaper in the Hobbyking sale!!)…   Some will prefer the Taranis which is probably more flexible (its has a module which the i10 does not).

DSC06959

Turnigy i10 + electric test plane (which is quite aerobatic)

DSC06982

Turnigy iA10 receiver installation.

 

WMAC Indoor – Lifting with a Multi-rotor

 indoor  Comments Off on WMAC Indoor – Lifting with a Multi-rotor
Sep 062015
 
multi-rotor plane lift

multi-rotor plane liftFriday evening, the plan was to see if the multi-rotor could lift and manoeuvre a small plane.

Lifting was easy with the plane moving around a bit in the down-draft. The multi-rotor had no problems with the swinging plane.

Forward flight was a bit tricky. A sort of uncontrolled glider tow. The plane wanted fly upside down and in another direction 🙂